SUNMAS Dual Channel TENS EMS Massager — 36 Modes, 25 Levels, FDA-Registered

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000

SUNMAS Dual Channel TENS EMS Massager with 36 Modes, 25 Intensity Levels and LCD Display

The SUNMAS dual channel TENS EMS massager SM9067 combines TENS, EMS, massage and female-care stimulation functions in one rechargeable device. It provides 36 programs, 25 intensity levels and two independently controlled output channels. The large LCD screen clearly displays the selected function, program, channel intensity, treatment time and battery status.

Product Overview

Four function groups, two independent channels, 36 programs and a screen that reports both channels at once — the SUNMAS SM9067 is aimed at buyers who want broad function coverage in a conventional wired format. TENS, EMS, massage and female care each carry nine programs, and Channels A and B can run different modes at different intensities across 25 levels. The timer adjusts from 10 to 60 minutes, mode memory restores the last program on startup, and load detection stops output if an electrode connection is lost. A 360mAh battery charges over Type-C in about 1.5 hours.

image1.jpgimage2.jpgimage3.jpgimage4.jpgimage5.jpgimage6.jpgimage7.jpgimage8.jpgimage9.jpg

A Closer Look at the Device

Start with the number that shapes everything else: 36 programs. Presented as one list, that's a long scroll. Presented as four groups of nine — TENS, EMS, massage, female care — it's four decisions, and the LCD confirms which function and program are running so the user doesn't have to hold it in memory. Grouping is the design decision the rest of the interface follows from.

The female care group is worth describing precisely, since it's the one most likely to be stretched in a listing. On the SM9067 it's a stimulation function, one of four, selectable and adjustable like the others. It isn't presented as a treatment for any condition, and packaging copy should keep it in the same register as TENS, EMS and massage. That's not just a compliance point — buyers who describe it consistently avoid the mismatch between listing language and what the device actually does.

Channel independence here is the full version. Channels A and B each take a different mode and a different intensity, so two electrode positions can run genuinely different programs at different strengths. Twenty-five levels per channel gives room to tune each side separately, and because both channels report to the same LCD, the user can check one against the other without switching screens.

Among the smaller behaviors, two stand out because they solve problems users actually hit. Load detection is the first. If an electrode connection is lost — a pad works loose, a lead pulls free — output stops and intensity returns to level 0. That's a more considered response than simply cutting power: the device doesn't resume at the previous strength once contact returns, so the user isn't caught by an output level they set some time ago. Mode memory is the second. Switching the device on restores the last program, which removes a small step that otherwise repeats every session.

Pause sits alongside these, stopping output temporarily without powering down, so an interrupted session can be resumed without rebuilding the setup. The timer covers 10 to 60 minutes with a 20-minute default, which handles both a short session and a longer routine.

The LCD is white-backlit and shows function, program, channel intensity, treatment time and battery status. It turns off after 30 seconds without button operation. Five readings on one screen is a reasonable ask for a device with two independent channels and four function groups; the alternative is cycling through menus mid-session.

Power is where this model differs from some others in the range. The battery is 360mAh, charged over Type-C in approximately 1.5 hours. That's a smaller capacity than the higher-spec dual channel models carry, and it fits the way this device is built: a wired unit with lead wires and electrode pads, used in defined sessions of 10 to 60 minutes, charged between them. Buyers comparing models should read the 360mAh figure alongside the charge time and the session length rather than in isolation — short sessions and a 1.5-hour charge are a coherent pairing.


Key Features

  • Four stimulation functions — TENS, EMS, massage and female care.

  • 36 programs — nine settings under each of the four main functions.

  • Dual independent channels — separate mode and intensity selection for Channels A and B.

  • 25 intensity levels for gradual, personalized adjustment.

  • Adjustable timer — 10 to 60 minutes, with a 20-minute default session.

  • Mode memory — restores the previously selected program when the device is switched on again.

  • Pause function — temporarily stops output without switching the device off.

  • Automatic load detection — stops output and returns intensity to level 0 when an electrode connection is lost.

  • White-backlit LCD — function, program, channel intensity, treatment time and battery status; backlight off after 30 seconds without button operation.

  • Rechargeable 360mAh battery with Type-C charging, approximately 1.5 hours for a full charge.


Technical Advantages

Four groups make 36 programs usable. Nine programs per function turns a long list into a short sequence of choices, and it gives the product a structure that's easy to explain in a listing without overselling.

Full per-channel independence. Separate mode and intensity on both channels is the wider form of dual channel control. It allows two positions to run different programs at different strengths, which is the capability that makes a second channel worth having.

Load detection that resets rather than resumes. Stopping output when contact is lost is the basic part; returning intensity to 0 is the part that matters. When the connection comes back, the device doesn't restart at a strength set earlier in the session.

Mode memory for routine use. Restoring the last program on startup suits a device used regularly, and removes a repeated setup step.

A display matched to the device's complexity. Five readings shown together — function, program, channel intensity, treatment time, battery — support a two-channel, four-group device without forcing menu navigation mid-session.

Battery and charge time read as a pair. 360mAh with a roughly 1.5-hour Type-C charge suits defined sessions in a wired format. It's a smaller capacity than higher-spec models in the range, and describing it in context is more useful to buyers than quoting the number alone.

Where It Fits

The SM9067 is designed for electrical stimulation and relaxation sessions on compatible body areas. Users connect the lead wires and electrode pads, select Channel A or B, choose a stimulation function and adjust intensity according to personal comfort. The compact rechargeable design suits home, office and travel use.

Within the range, it sits as the broad-coverage wired dual channel model. Against a simpler dual channel unit, it adds the female care group, 25 intensity levels and load detection. Against a wireless or heated flagship, it stays with lead wires and electrode pads, a smaller battery and a conventional format — which is also where it competes on price and simplicity. Buyers building a range can position it for customers who want the widest function coverage without the cost and charging routine of a higher-spec model, and the accessory list is correspondingly simple: lead wires and electrode pads.


Why Buyers Choose SUNMAS

SUNMAS develops TENS and EMS products for international B2B customers. The SM9067 combines independent channel control, multiple stimulation functions and a clear LCD interface in one device.

For a catalog, the model is straightforward to describe accurately: four functions, 36 programs, two independently controlled channels, 25 intensity levels, a 10–60 minute timer, mode memory, pause, load detection, a 360mAh battery and Type-C charging at approximately 1.5 hours. Each of those can be checked against the unit, which supports listings that survive customer questions. The female care function is the one place where wording needs care — described as a stimulation option alongside the other three, it stays accurate and avoids overreach.

OEM and ODM support covers branding, packaging and product configuration. Because the device runs on lead wires and electrode pads, those belong in the initial accessory plan rather than being added later, and the wired format keeps that plan short.


FAQ

What functions does the device offer?
Four: TENS, EMS, massage and female care, with nine programs under each.

Are the two channels fully independent?
Yes. Channels A and B allow separate mode and intensity selection, with 25 intensity levels available.

What happens if an electrode connection is lost?
Automatic load detection stops output and returns intensity to level 0, so the device doesn't resume at the previous strength when contact returns.

Does it remember my last program?
Yes — mode memory restores the previously selected program when the device is switched on again.

How long is a session?
The timer is adjustable from 10 to 60 minutes, with a default of 20 minutes.

What does the display show?
Function, program, channel intensity, treatment time and battery status on a white-backlit LCD, which turns off after 30 seconds without button operation.

How is it charged, and how long does it take?
Through a Type-C port, using the 360mAh battery. A full charge takes approximately 1.5 hours.

Do you offer OEM and ODM services?
Yes — for branding, packaging and product configuration.

Attribute Specification
Product Name Dual Channel TENS EMS Massager
Model No. SM9067
Application Body relaxation and electrical stimulation on compatible areas
Main Function TENS, EMS, Massage and Female Care Stimulation
Channels Dual Channels with Independent Mode and Intensity Control
Modes 36 Programs
Intensity Levels 25 Levels per Channel
Timer Adjustable from 10 to 60 Minutes; 20-Minute Default
Control Method Button Control
Display White-Backlit LCD
Special Functions Mode Memory, Pause Function and Automatic Backlight Timeout
Battery Capacity 3.7V / 360mAh
Charging Port Type-C
Charging Time Approximately 1.5 Hours
Pulse Frequency 1–300Hz ±10%
Pulse Width 30–495μs ±20%
Load Detection Supported; Output Returns to Level 0 when Disconnected
Customization OEM/ODM Available

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000
Email Email Tel Tel WhatsApp WhatsApp WeChat WeChat
WeChat
TopTop
email goToTop