Product Overview
A beauty device with three technologies built in raises an obvious question before purchase: will all three actually get used, or will one become the default while the other two sit idle? The SUNMAS SM9028 makes a reasonable case for all three. It combines 1MHz radio frequency, EMS stimulation and red or blue LED light in one rechargeable handset, with Face and Body modes that use different EMS pulse widths. RF and EMS can run together, four electrodes on the base deliver energy directly to the skin, and a built-in 10-minute timer closes each session. The 3.7V 1400mAh battery supports cordless use. Engineering samples and production units are designed to achieve IPX7 water resistance; the prototype sample is not waterproof.







A Closer Look at the Device
Three functions in one handset is a familiar pitch in the beauty category, and it's usually where the questions start. Do the functions interfere with each other? Does switching between them take more effort than it's worth? And is the third function there because it's useful, or because it fills out a feature list?
Take the last question first. On the SM9028, the three functions occupy different points in a routine rather than duplicating each other. RF works through gentle heating of the skin's underlying layers, described as supporting collagen-focused care and firmer-looking skin. EMS works through stimulation, with three intensity levels for facial or body toning and firming care. LED light adds red and blue modes, selectable according to different skincare needs. Heating, stimulation and light are not variations on one another, which is the basic argument for combining them.
The device answers the interference question with a straightforward design choice: RF and EMS can operate at the same time. So a session doesn't require choosing between the heating-based function and the stimulation-based one. The LED function sits alongside as a selectable mode.
On effort, the controls are plain buttons, and the device runs in Face or Body mode. What's worth checking here is whether the mode switch does anything beyond renaming the same output. On the SM9028, Face and Body modes use different EMS pulse widths — the pulse characteristics change with the mode, which is what makes separate facial and body settings meaningful rather than decorative.
The application method is also simpler than it might be. Four electrodes sit on the base of the unit and transmit both RF and EMS energy directly to the skin. There are no separate pads to position, replace or lose, so the routine is a matter of holding the device against the target area. For a device used several times a week, fewer components means less to keep track of.
Where the design asks something of the user is in the routine itself. Like most RF and EMS beauty devices, the SM9028 is intended for use with the skin prepared according to the product instructions, and results are presented in terms of appearance over a course of use rather than a single session. That's the honest framing, and it's the framing any listing for this product should keep.
The 10-minute timer supports that routine approach. Each session has a defined length and the device switches off automatically at the end. Ten minutes is short enough to fit into an evening routine and consistent enough to repeat, which matters more for appearance-focused care than an open-ended session would.
The battery is 3.7V at 1400mAh, supporting cordless use without a cable running to a socket during a session. And one point should be repeated rather than paraphrased: engineering samples and production units are designed to achieve IPX7 water resistance, while the prototype sample is not waterproof. That sentence needs to travel intact into manuals, retail listings and distributor materials. A water-resistance claim published without it is a returns problem waiting to happen.
Key Features
1MHz RF function — gently heats the skin's underlying layers to support collagen-focused care and firmer-looking skin.
Three RF intensity levels for selecting a preferred setting.
EMS stimulation with three intensity levels for facial or body toning and firming care.
Red and blue LED light modes, selectable according to different skincare needs.
Separate Face and Body modes using different EMS pulse widths for more targeted application.
Simultaneous RF and EMS operation — the two functions can run together.
Built-in 10-minute timer that switches the device off automatically at the end of the session.
Rechargeable 3.7V 1400mAh battery for cordless use.
IPX7 water resistance — designed into engineering samples and production units; the prototype sample is not waterproof.
Technical Advantages
Different pulse widths, not different labels. Face and Body modes alter the EMS pulse characteristics, so the mode switch changes what the device does. For buyers comparing multi-function devices, this is the kind of specification worth checking across models, since some units change only the preset name.
Three functions that don't overlap. Heating, stimulation and light address different aspects of a routine. Combining them makes sense in a way that combining three variations of the same function wouldn't, and it's the reason a single handset can replace several steps.
Simultaneous RF and EMS. Running both at once shortens the routine and avoids mid-session switching. The engineering question — how well the two systems coexist in one handset — is answered by the device being designed for combined operation rather than sequential use.
Direct electrode contact. Four electrodes on the base deliver energy straight to the skin, with no separate pads to source or replace. That simplifies both the routine and the accessory list, which matters for buyers planning packaging.
A specific RF frequency. 1MHz is a figure buyers can compare and document, unlike a general reference to radio frequency. Specificity of this kind is what makes a listing verifiable.
Water resistance carried with its caveat. IPX7 as designed for engineering samples and production units, with the prototype explicitly excluded, is the version of the claim that survives scrutiny. Publishing it in full protects both the buyer's listing and the end user's expectations.
Where It Fits
The SM9028 is designed for facial and body skincare, firming care, EMS muscle stimulation and red or blue LED light care. Users select Face or Body mode, choose the RF and EMS intensity, and apply the electrodes directly to the target area according to the product instructions.
Its place in a range is as a multi-technology platform rather than a single-function tool. Buyers whose customers want RF, EMS and LED light in one device get all three sharing a routine and a fixed session length, with a shorter accessory list than separate devices would require. Buyers whose customers prefer dedicated single-function tools are a different audience, and this device isn't positioned against them. Where it competes is against other multi-function handsets, and there the specifics — pulse widths that change with mode, simultaneous RF and EMS, a stated RF frequency — are the comparison points.
Why Buyers Choose SUNMAS
SUNMAS develops professional beauty and electrostimulation products for international B2B customers. The SM9028 combines RF, EMS and LED light functions in a compact platform suitable for OEM and ODM projects, including customized branding, packaging and market configurations.
Commercially, the device offers three technologies that can each be described in a sentence, a fixed 10-minute routine, and a specification set that includes both the RF frequency and the water-resistance caveat. That last item is where a lot of beauty-device listings run into trouble: an IPX7 claim published without the prototype exclusion invites customer complaints and returns. Carrying the full wording into packaging and product pages protects the buyer's channel and keeps the claim defensible.
OEM and ODM support covers branding, packaging and market-specific configuration, so buyers can adapt the product to regional beauty-care positioning rather than working within a fixed presentation.
FAQ
What functions does the device combine?
1MHz RF, EMS stimulation, and red or blue LED light care, in one rechargeable unit.
Can RF and EMS be used at the same time?
Yes. The two functions can operate simultaneously, or separately.
How do Face and Body modes differ?
They use different EMS pulse widths, so the mode switch changes the output rather than only the label.
How long is a session?
A built-in 10-minute timer defines the session and switches the device off automatically when it ends.
How many intensity levels are available?
Three for RF and three for EMS.
Is the device waterproof?
Engineering samples and production units are designed to achieve IPX7 water resistance. The prototype sample is not waterproof.
How is it powered?
By a rechargeable 3.7V 1400mAh battery, supporting cordless use.
Do you offer OEM and ODM services?
Yes — including customized branding, packaging and market configurations.
| Attribute | Specification |
| Product Name | RF EMS Face and Body Beauty Device |
| Model No. | SM9028 |
| Application | Facial and body skincare, firming and toning care |
| Main Function | RF, EMS Stimulation and Red/Blue LED Light Care |
| Treatment Modes | Face Mode and Body Mode |
| RF Levels | 3 Levels |
| EMS Intensity Levels | 3 Levels |
| LED Light Modes | Red Light and Blue Light |
| RF Frequency | 1MHz |
| EMS Frequency | 200Hz ±10% |
| EMS Output Voltage | 8.8V ±10% with 500Ω Load |
| EMS Pulse Width | Body: 100/300/500μs ±20%; Face: 25/50/75μs ±20% |
| Timer | 10 Minutes |
| Battery Capacity | 3.7V / 1400mAh |
| Product Dimensions | 83.8 × 61.8mm |
| Material | ABS |
| Customization | OEM/ODM Available |